Related News
A blue-collar worker's story
By Pan Qingyun and Momo Pan |
April 30, 2013, Tuesday
|
Print Edition
Print Edition
HUANG Bin entered Zuiko (Shanghai) Corporation at the end of 2003 as an ordinary electrician. In 2004 Huang started to work as an electrical designer.
In 2011, he gained his senior technician certificate. Later, he became leader of the company's production safety and equipment management. Since he took the job, his technical team has solved 238 technical problems, creating large profits for the company. Now he is the chief mechanic of Zuiko, and was honored as "Shanghai's Chief Mechanic" and "Shanghai Technical Expert" last year.
Zuiko is a sanitary equipment maker, and a laser cutting machine is part of their major production equipment. In the past, the optical components of laser cutting machines were often polluted during the cutting process, which led to a lot of defects on products. It became a tough problem for the company how to clean and maintain those optical parts because asking equipment producers to carry out repairs led to delays and was expensive. Huang has solved the problem and many others in the using of the laser cutting machines.
Another of Huang's special skills is to trace equipment faults quickly. During production, many faults are actually caused by just a small part, but the technician has to be very skillful to find it quickly. With design drawings of most major equipment fixed in his mind, Huang can identify the faulty part in a very short time.
In 2011, he gained his senior technician certificate. Later, he became leader of the company's production safety and equipment management. Since he took the job, his technical team has solved 238 technical problems, creating large profits for the company. Now he is the chief mechanic of Zuiko, and was honored as "Shanghai's Chief Mechanic" and "Shanghai Technical Expert" last year.
Zuiko is a sanitary equipment maker, and a laser cutting machine is part of their major production equipment. In the past, the optical components of laser cutting machines were often polluted during the cutting process, which led to a lot of defects on products. It became a tough problem for the company how to clean and maintain those optical parts because asking equipment producers to carry out repairs led to delays and was expensive. Huang has solved the problem and many others in the using of the laser cutting machines.
Another of Huang's special skills is to trace equipment faults quickly. During production, many faults are actually caused by just a small part, but the technician has to be very skillful to find it quickly. With design drawings of most major equipment fixed in his mind, Huang can identify the faulty part in a very short time.
- About Us
- |
- Terms of Use
- |
-
RSS - |
- Privacy Policy
- |
- Contact Us
- |
- Shanghai Call Center: 962288
- |
- Tip-off hotline: 52920043
- 娌狪CP璇侊細娌狪CP澶05050403鍙-1
- |
- 浜掕仈缃戞柊闂讳俊鎭湇鍔¤鍙瘉锛31120180004
- |
- 缃戠粶瑙嗗惉璁稿彲璇侊細0909346
- |
- 骞挎挱鐢佃鑺傜洰鍒朵綔璁稿彲璇侊細娌瓧绗354鍙
- |
- 澧炲肩數淇′笟鍔＄粡钀ヨ鍙瘉锛氭勃B2-20120012
Copyright 漏 1999- Shanghai Daily. All rights reserved.Preferably viewed with Internet Explorer 8 or newer browsers.
